Elitech GPS-6 data logger is mainly used to record the temperature and humidity of food, pharmaceuticals and chemicals, etc. It is widely applicable to each link in storage and logistics of cold chain, such as refrigerated container, refrigerator truck, cooler bag, cooler cabinet, medicine cabinet, cold storage, laboratory, etc.
This data logger conforms to GSP standard of new edition. It has one big LCD screen, a button, an external temperature sensor and an external humidity sensor. With two modes to save data: Full record stop and cyclic record, the data logger has the function of over limit sound-light alarm. It can also automatically shorten the record interval in case of over temperature and humidity limit. Two pieces of built-in magnets are convenient to fix the data logger onto metal material surface.
Temperature measuring range: -40℃~85℃
Temperature accuracy: ±0.5℃(-20℃~40℃; ±0.1℃(other)
Humidity range: 10%~99%
Humidity accuracy: ±3%RH(25℃,20%~90%RH); ±5%RH(other)
Resolution: temperature 0.1℃, humidity 0.1%RH
Record capacity: 16000 points (max)
Record interval: 10sec~24 hours continuously set
Data interface: USB
Power supply: single-use 3.6V lithium battery or powered via USB
Battery life: two years at room temperature with 15 minutes record interval and buzzer alarm disabled.
Ambient temperature: -30℃~70℃. At low temperature environment, the LCD screen displays normal record but a little slowly. It will display data normally when the ambient temperature returns to normal.
1x Temperature data logger
1x Temperature Sensor
1x Humidity Sensor
1x USB Cable
1x USER Manual
Note: when you first use the data logger, install the data management software.